Slushy Machine Operation and Mix Making Guide

This page provides a basic instructions to set-up your machine and create your slushy drink mix.

For in depth step-by-step guides, please browse the FAQ page. If you can not find a satisfactory answer, please contact your Regional Team directly for support.

BEFORE YOU DO ANYTHING

During transport the slushy machine may move around and the bowl may dislodge from the base, please make sure the bowl is clicked in properly.
The machine will leak if not.

SLUSHY MACHINE SET-UP VIDEO

This short video explains the step-by-step process to follow when you receive your slushy machine.

SETTING UP YOUR MACHINE

  1. Plug in machine to power outlet
  2. Make mix (see below)
  3. Let mix freeze down (allow 60 minutes)
  4. Once mix is low (below the silver tube) Add more mix, or switch onto night mode to stop the machine over freezing
  5. Turn off at the end of the night

SLUSHY CONCENTRATE MIXING VIDEO

This short video explains the step-by-step process to follow when diluting your slushy concentrate mix.

HOW TO CREATE YOUR MIX

Brain Freeze, Fruzo, Fruzo Supreme, Triple 3 Zero (as mocktail)

  1. Measure out 1L of concentrate
  2. Add 4L of water (should equal 5L total)
  3. Pour mix into your machine and let it freeze down (should take around 45/60 minutes)
  4. Repeat steps 1-3 to fill other barrel (with same or different mix)

Triple 3 Zero (adding own alcohol)

Using 37% alcohol

  • 5% finished strength = 1L Mix + 675ml alcohol + 3.4L water
  • 7% finished strength = 1L Mix + 945ml alcohol + 3.1L water

Using 40% alcohol

  • 5% finished strength = 1L Mix + 625ml alcohol + 3.4L water
  • 7% finished strength = 1L Mix + 875ml alcohol + 3.2L water
  1. Pour mix into your machine and let it freeze down (should take around 45/60 minutes)
  2. Repeat steps to fill other barrel (with same or different mix)

Triple 3

  1. Measure out 2.5L of your concentrate
  2. Add 2.5L of water concentrate
  3. Pour mix into your machine and let it freeze down (should take around 45/60 minutes)
  4. Repeat steps to fill other barrel (with same or different mix)